visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 2 4 2 5 n 5050 s 2 rev c ultra low profile 0404 power divider 50 to 50 description the PD2425N5050S2 is a low profile 1mm square, sub miniature wilkinson power divider in an easy to use surface mount package. t he PD2425N5050S2 is ideal for high volume manufacturing and delivers higher perfo rmances than traditional printed and lumped element solutions. the PD2425N5050S2 is matched to 50 and has a height profile of 0.6 mm with an lga interface whic h is ideal for high level integrations in module level solutions in the follo wing markets: wimax (2.3 2.7 ghz), 802.11b, g & n, 2.4 ghz ism band, bluetooth ( le), bluetooth and zigbee. the PD2425N5050S2 does not include the resistive el ement and therefore, requires an external resistor for operation. the pd2425n505 0s2 is available on tape and reel for high volume manufacturing pick and place. detailed electrical specifications: specifications subject to change without notice. room (25 c) parameter min. typ. max unit frequency 2400 2500 mhz input port impedance 50 output port impedance 50 return loss 21 27 db insertion loss* 0.39 0.46 db amplitude balance 0.01 0.35 db phase balance 0.5 1.3 degrees isolation (output ports) 20 23 db power handling 0.5 watts features: ? 24002500 mhz ? 23 db isolation (output ports) ? good return loss ? 0.6 mm height profile ? 50 input / 50 outputs ? low insertion loss ? surface mountable ? tape & reel ? nonconductive surface ? rohs compliant ? external resistor required ? halogen free operating temperature 55 +85 oc * insertion loss stated at room temperature (insert ion loss is approximately 0.1 db higher at +85 oc) .23 .23 1.04 .10 1.04 .10 .62 .05 .33 .33 .50 .50 3x .25 3x .25 1 2 4 3 bottom view (farside) side view top view (nearside) mechanical outline dimensions are in millimeters tolerances are noncumulative input gnd 4 3 designation pin 1 2 output 1 output 2 3x .27 3x .27
visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 2 4 2 5 n 5050 s 2 rev c outline drawing typical broadband performance: 500 mhz. to 8.0 ghz. isolation return loss insertion loss amplitude balance phase balance
visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 2 4 2 5 n 5050 s 2 rev c typical performance: 2200 mhz. to 2900 mhz. return loss amplitude balance isolation phase balance insertion loss
visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 2 4 2 5 n 5050 s 2 rev c mounting configuration: in order for xinger surface mount components to wor k optimally, the proper impedance transmission line s must be used to connect to the rf ports. if this condition is not satisfied, insertion loss, isolation and vs wr may not meet published specifications. all of the xinger components are constructed from o rganic ptfe based composites which possess excellen t electrical and mechanical stability. xinger compone nts are compliant to a variety of rohs and green st andards and ready for pbfree soldering processes. pads are gol d plated with a nickel barrier. an example of the pcb footprint used in the testing of these parts is shown below. in specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. in addition, s ince the pd2425s5050s2 is a wilkinson power divider , an external 0201 100 resistor must be mounted in loca tions r1 as shown in the figure below. pad footprint w/ 0201 resistor locations dimensions are in millimeters mounting footprint plated thru hole to ground solder resist footprint pad (s) circuit pattern 3x transmission line .50 3x .29 sq. .36 sq. 2x .21 .50 .21 0201 resistor 3x .29 .13
visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 2 4 2 5 n 5050 s 2 rev c packaging and ordering information parts are available in reels and are packaged per e ia 4812. parts are oriented in tape and reel as s hown below. minimum order quantities are 4000 per reel. see model numbers be low for further ordering information . 4.00 ?1.50 1.21 .70 .18 4.00 1.21 2.00 8.00 3.50 1.75
|
